SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-8
31215918
2.5 FUNCTION CHECK
Perform the Function Check as follows:
1.
From the
Ground Control Panel
with no load in the plat
-
form:
a.
Ensure that the key selector switch and the platform lift
switch operates properly.
b.
Ensure that all machine functions are disabled when
the Emergency Stop Button is depressed.
c.
With platform raised a few feet (1 m), ensure that the
manual descent control (T-handle located at the left
rear of the machine, next to the battery charger) lowers
the platform properly.
d.
Check that Pothole Protection system bars are fully low
-
ered when the platform is raised.
.
2.
From the
Platform Control Console
:
a.
Ensure that the control console is firmly secured in the
proper location.
b.
Ensure that all guards protecting switches are in place.
c.
Operate all switch functions, drive/lift mode select
switch, and horn button.
d.
Operate all platform joystick functions to ensure proper
operation of drive, lift, steer, and enable trigger switch
operation.
e.
Ensure that all machine functions are disabled when
the platform Emergency Stop Button is depressed.
f.
Ensure all machine functions stop when function con
-
trol is released or when joystick trigger is released.
Platform Elevated - Pothole Bars Fully Lowered
Platform Fully Lowered - Pothole Bars Raised
To
order
go
to
Discount-Equipment.com
