SECTION 1 - SAFETY PRECAUTIONS
1-2
– JLG Lift –
3120774
1.2 PRE-OPERATIONAL SAFETY
• Read your manual. understand what you’ve read - then
begin operations.
• Allow only those authorized and qualified personnel to
operate machine who have demonstrated that they under-
stand safe and proper operation and maintenance of the
unit.
• An operator must not accept operating responsibilities
until adequate training has been given by competent and
authorized persons.
• Before operation check work area for overhead electric
lines.
(see electrocution hazard, section 1-2.)
• Before operation check work area for machine traffic such
as forklifts, cranes, and other construction equipment.
• Set-up machine for operation only on a smooth, firm level
surface.
• Ensure that operators of other overhead and floor level
machines are aware of the aerial platforms presence. Dis-
connect power to overhead cranes, barricade floor area if
necessary.
• Precautions to avoid all known hazards in the work area
must be taken by the operator and his supervisor before
starting the work.
• Do not operate this machine unless it has been serviced
and maintained according to the manufacturers specifica-
tions and schedule.
• Ensure daily inspection and function check is performed
prior to placing machine into operation. Have authorized
personnel take any necessary corrective action before
placing machine into operation.
• Never disable or modify any safety device. Any modifica-
tion of the machine is a safety violation and is a violation of
osha and ansi rules.
• Do not operate machine when exposed to high wind, rain
or snow.
• Never operate or raise platform when machine is on a
truck or other vehicle.
Figure 1-1. Read Your Manual.
To
order
go
to
Discount-Equipment.com
