Section 3- Controls and Indicators
3
-
25
31211368
3.4 STEER MODES
Three steer modes are available for operator use.
Note:
2-Wheel Front Steer mode is required for travel on public roads.
Manual Steering Alignment Mode Change
Note:
Steer mode will change immediately after selection.
1. Bring machine to a stop using service brake. If front steer mode (
2
) is active and rear
wheels are aligned, go directly to step 4.
2. With circle steer (
1
) or crab steer (
3
) mode active, turn the steering wheel until the
left rear wheel (
4
) is aligned with the side of the machine.
3. Select front steer mode (
2
).
4. Turn the steering wheel until the left front wheel (
5
) is aligned with the side of the
machine.
5. Wheels are now aligned. Select desired steer mode.
O
AL
20
3
0
2
-
Wheel Front Steer
4
-
Wheel Circle Steer
4
-
Wheel Crab Steer
OD0220
1
2
3
O
AM
2400
4
5
https://www.forkliftpdfmanuals.com/
