Section 3- Controls and Indicators
3
-
12
31211368
Right Dash Control Panel
1.
Front Work Lights Switch (if equipped):
On/Off switch.
2.
Boom Work Lights Switch (if equipped):
On/Off switch.
3.
Rear Work Lights Switch (if equipped):
On/Off switch.
4.
Beacon Light Switch (if equipped):
On/Off switch.
5.
Hazard Lights Switch (if equipped):
On/Off switch.
6.
Power Outlet (if equipped):
12V receptacle.
7.
Auxiliary Decompression Switch:
Press to relieve pressure in auxiliary hydraulic
circuit. See page 5
18.
8.
Master Light and Road Lights Switch (if equipped):
Three positions: Off, Enable, On.
Switch must be in the enable or on position in order to operate work lights. Prior to
machine shut-down, ensure switch is in the off position.
9.
Boom Ride Control Switch (if equipped):
On/Off switch. While enabled and
travelling 3 mph (5 kph) or faster, the system acts to improve boom control over
rough terrain. Depress switch again to disable boom ride control.
10.
USB Port (if equipped):
USB ports under protective tab.
11.
Auxiliary Electric Switch (if equipped):
On/Off switch.
O 0132
D
6
14
13
9
7
12
8
11
1
2
3
4
5
10
15
https://www.forkliftpdfmanuals.com/
