Oshkosh Corporation JLG TOUCAN 10E, Operation And Safety Manual

Page: 158 / 171

SECTION 5 – GENERAL SPECIFICATIONS AND MAINTENANCE
31210312 – JLG Lift –
5-65
6-7 Accessory
7-7 Electric Motor
6634
CANBUS COMM LOST The platform module failed to receive messages
from both the master and the slave modules. Refer problem to a qualified JLG mechanic.
DTC FAULT MESSAGE DESCRIPTION CHECK
DTC FAULT MESSAGE DESCRIPTION CHECK
672
FUNCTIONS CUTOUT - SOFT
TOUCH DETECTED An obstacle has been detected by the soft touch
device (if equipped). • Clear the obstacle.
Refer problem to a qualified JLG mechanic.
673
FUNCTIONS CUTOUT - GATE
OPEN DETECTED If equipped - Platform entry gate is detected open. • Check if the Gate Limit Switches are damaged, obstructed or
jammed.
Refer problem to a qualified JLG mechanic.
DTC FAULT MESSAGE DESCRIPTION CHECK
7721
MASTER MODULE CAPACITOR
BANK FAULT There is a problem with the Master Module (right
controller). Refer problem to a qualified JLG mechanic.
7722
SLAVE MODULE CAPACITOR
BANK FAULT There is a problem with the Slave Module (left
controller). Refer problem to a qualified JLG mechanic.
To
order
go
to
Discount-Equipment.com