Oshkosh Corporation JLG TOUCAN 10E, Operation And Safety Manual

Page: 140 / 171

SECTION 5 – GENERAL SPECIFICATIONS AND MAINTENANCE
31210312 – JLG Lift –
5-47
5.18 DTC CHECK TABLES
0-0 Help Comments
DTC FAULT MESSAGE DESCRIPTION CHECK
001
EVERYTHING OK The normal help message in Platform Mode. Dis -
plays on the analyzer only.
002
GROUND MODE OK The normal help message in Ground Mode. Dis -
plays on the analyzer only.
008
FUNCTIONS LOCKED OUT -
SYSTEM POWERED DOWN After 2 hours without activity, the Control System
enters a low-power state to preserve battery
charge. Displays on the analyzer only; the MDI’s
LED is blinking with the display Off.
• Normal operation should resume after a power cycle.
Refer problem to a qualified JLG mechanic.
0010
RUNNING AT CUTBACK - OUT
OF TRANSPORT POSITION Drive speed is limited while the mast is elevated.
Displays on the analyzer only. • Fully stow the platform.
• Check that the mast switches are securely mounted.
Refer problem to a qualified JLG mechanic.
0022
DIFFERENT FUNCTION
SELECTED & IGNORED Two hydraulically powered movements simulta -
neously controlled.
• Release joysticks and allow to center.
Refer problem to a qualified JLG mechanic.
To
order
go
to
Discount-Equipment.com