Oshkosh Corporation JLG R2632, Operation And Safety Manual

Page: 55 / 108

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31215932
3-23
3.14 MACHINE LIFTING AND TIE DOWN
The machine may be lifted using a forklift truck. Lift only using the
built-in forklift pockets at the rear of the machine and only with the
platform in the stowed position. First adjust the width of the forklift
truck lifting tines to fit the machine forklift pockets. Then slide the
tines into the forklift pockets and carefully lift machine.
The machine may also be lifted using a spreader bar and four equal
length straps or chains capable of supporting the full gross weight of
the machine. Lift only using the lifting lugs provided at the four cor -
ners of the machine.
0"%
0"%