Oshkosh Corporation JLG R2632, Operation And Safety Manual

Page: 25 / 108

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
31215932
2-3
Inspection and Maintenance Table
TYPE FREQUENCY
PRIMARY
RESPONSIBILITY
SERVICE
QUALIFICATION
REFERENCE
Pre-Start Inspection Before using each day, or whenever there’s an operator change. User or Operator User or Operator Operation and Safety Manual
Pre-Delivery Inspection
(see Note below)
Before each sale, lease, or rental delivery. Owner, Dealer, or User Qualified JLG Mechanic Service and Maintenance Manual and appli
-
cable JLG inspection form
Frequent Inspection
In service for 3 months or 150 hours, whichever comes first; or out of
service for a period of more than 3 months; or purchased used.
Owner, Dealer, or User Qualified JLG Mechanic Service and Maintenance Manual and appli
-
cable JLG inspection form
Annual Machine
Inspection
(see Note below)
Annually, no later than 13 months from the date of prior inspection. Owner, Dealer, or User
Factory Trained Service
Technician
(Recommended)
Service and Maintenance Manual and appli -
cable JLG inspection form
Preventative Maintenance At intervals as specified in the Service and Maintenance Manual. Owner, Dealer, or User Qualified JLG Mechanic Service and Maintenance Manual
NOTE: Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.
JLG INDUSTRIES, INC. RECOGNIZES A FACTORY-TRAINED SERVICE TECHNICIAN AS A PERSON WHO HAS SUCCESSFULLY COMPLETED THE JLG SERVICE TRAINING SCHOOL FOR
THE SPECIFIC JLG PRODUCT MODEL.
NOTICE