Oshkosh Corporation JLG ES1330L, Operation And Safety Manual

Page: 47 / 98

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31217186
3-15
3.9 PLATFORM MANUAL DESCENT
Use the Platform Manual Descent in the event of total power failure to
lower the platform using gravity. The red T-handle is located on the left
rear of the machine, just below the platform ladder. Look for the
instruction decal located beside the T-handle.
1.
Locate the manual descent control red T-handle.
KEEP HANDS AND ARMS OUT OF THE PATH OF THE SCISSOR ARMS AND PLATFORM
WHILE LOWERING.
2.
Grasp the T-handle and slowly pull out to lower the scissor
arms/platform. When the platform is lowered to the desired
level, allow the T-handle to return to its closed position.
0"%