Section 5 - Attachments and Hitches
5-43
31200205
5.9
HITCHES (3508PS, 4008PS, 3509PS & 4009PS)
Machines may be equipped with various types of hitches.
Maximum towing capacity shall be the smallest of the telehandler and hitch
capacities. Refer to local governmental regulations for additional towing
requirements and/or restrictions.
Note:
Ensure hitch is in lowest position when towing trailer. Speed and/or load may
need reduced if traveling on ground which is not level.
If not previously installed, secure hitch to machine with hardware supplied with
installation.
Pin Hitch - CUNA C (Italy)
Maximum combined weight of trailer and load ............................ 6000 kg (13 225 lb)
Maximum vertical weight at hitch interface..................................... 1500 kg (3305 lb)
Connecting trailer for towing:
1. Remove safety pin (
1
) and pull pin (
2
) from hitch (
3
).
2. Align machine and tow eye of trailer.
3. Place pin through hitch and tow eye. Secure pin with safety pin.
4. If equipped, connect trailer harness to trailer plug.
Adjusting Hitch Height:
1. Pull lock pin (
4
) and lift handle (
5
) to release locking mechanism.
2. Move hitch to desired height.
3. Lower handle. When locking mechanism engages, lock pin will return to locked
position
1
2
5
3
4
O
AM2
440
Summary of Contents for JLG 3508PS
