OWNER’S MANUAL
XMP100
OsdAudio ®
775 Columbia St.,
Brea. CA92821
www.osdaudio.com
XMP100 Owner’s Manual 51115
Congratulations on your purchase of the OsdAudio ® XMP100.
Please take a few moments to read this entire manual, and be sure to
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.
NOTE: If any part of this product is damaged or missing, please call your
dealer or OsdAudio ® directly at 888 779 4968.
Please read your warranty and retain your receipt and original carton
for possible future use.
For more information about OsdAudio ® electronics, speakers and
accessories please visit www.osdaudio.com
XMP100
Digital Stereo Power Amplifier
FEATURES:
• MAIN / INTERRUPT priority input switching
• Class D Amplification (89% Efficient)
• MAIN auxiliary output
• Speaker A/B switching
• Front panel Balance and Volume controls
• Signal sensing “Power On” and Trigger mode
SPECIFICATIONS
Stereo (8 ohm):
50W per channel, <1% THD+N
Stereo (4 ohm):
75W per channel, <1% THD+N
Bridged Mono (8 ohm):
160W, 1kHz, <1% THD+N
Frequency Response:
10Hz ~ 30kHz, -2dB/ +1dB
Signal to Noise Ratio:
100dB below 50W output into 8 ohms
w/20kHz Lowpass filter
Channel Separation:
65dB @ 1kHz, referred to 50W output
into 8 ohms
Input Sensitivity:
700mV input for rated 50W output
into 8 ohms
AC Power Consumption:
200W maximum
Net Weight:
4.7lbs / 2.2kgs
Gross Weight:
6.8lbs / 3kgs
2.15”
(55mm)
16.9” (430mm)
7.65”
(194mm)
• Rear mounted treble and bass controls
Bass/Treble Control:
+/- 12dB @ 100Hz and 10kHz
D I G I TA L P O W E R
A M P L I F I E R
XMP
100
D I G I TA L P O W E R
A M P L I F I E R
XMP
100
