Osburn HYBRID-45 MF, Owner'S Manual, Page: 27 / 32

ALARM CODES CHART
MESSAGE CORRESPONDING WARNING
Pressure switch warning.
Warning caused by one of the two automatic L-250 sensors: one is located under the pellet chute and the other
one is inside the hopper heat shield.
L-250 manual reset high temperature switch, located beside convection blower.
Hopper is empty
Lighting warning.
Hopper lid stay open more than 3 minutes.
Inverted polarity in power outlet.
Power outage
Igniter fuse is burnt out.
SMOKE SMELL OR SOOT BUILD-UP
Because it is a wood-burning device, your Osburn Hybrid-45 MF may emit a faint wood-burning odor. If this increases beyond normal, or if
you notice an unusual soot build-up on walls or furniture, check your exhaust system carefully for leaks. All joints should be properly sealed.
Also clean your stove, following instructions in “
MAINTENANCE ”. If problem persists, contact your dealer.
TROUBLESHOOTING GUIDE 27