SYMBOLS USED WITH THIS PRODUCT
SAFETY INSTRUCTIONS
7
2
Man, Earth and the Universe
are forces that create an
immovable centre of balance . . .
the
balance of power
“
”
Read operator’s
manual
Double
insulated
Centre
positive
Recycle
See page 5
Short - circuit proof
safety transformer
For indoor use
only
WEEE
See page 5
European
Conformity
Warning
RoHS
See page 5
Plug type
OTHER OSAKI
SPECIFIC OPERATING HAZARDS
Always use the corresponding charger that
comes with the Screwdriver.
Never operate the Screwdriver whilst charging.
Never charge the Screwdriver in a damp or wet
environment. The charger is for indoor use only.
N e v e r c h a r g e t h e S c r e w d r i v e r i n a n a i r
temperature below 40
°
F (4.5
°
C) or above 105
°
F
(40.5
°
C). This could cause serious damage to
the battery.
Never cover the charger, use it in direct sunlight
or near heat sources.
GENERAL OPERATING HAZARDS
Always stay alert and watch what you are doing.
Always ensure the tool is kept in a good working
condition. Do not use the tool if any parts are
missing or damaged. Ensure servicing and repair
is undertaken by a suitably qualified person.
Never modify the tool or accessories and only
u s e i t f o r t h e t a s k f o r w h i c h i t h a s b e e n
designed.
Never force or apply excessive pressure, let the
tool do the work for you.
Never operate the tool when tired or under the
i n f l u e n c e o f a l c o h o l o r p r e s c r i p t i o n / n o n -
prescription drugs.
Never touch parts of the tool or accessories
when they are moving.
PERSONAL PROTECTION
Always wear approved eye protection when using
the screwdriver.
WORKPLACE HAZARDS
Always keep your work area clean and well lit.
Always maintain a balanced body position and
secure footing.
Always use a vice or clamping device to hold
small work pieces firmly in place.
Always keep children away from the work area
and where tools are stored.
Always be aware of hidden cables and pipes.
Always avoid body contact with earthed or
grounded surfaces such as pipes, radiators and
refrigerators.
Never make contact with electric power sources
as this tool is not insulated.
Never work in a combustible atmosphere.
Osaki Power Tools are committed to the Production of a range of Quality Power Tools
that are designed for high performance and long service life. By following the recommended
safety and maintenance procedures they will last for many years.
OSA-279-7100K_Instructions.qxd 22/08/2011 07:53 Page 2
