Italwinch winch is constructed with materials resistant to marine environment, it is essential to periodically
remove salt deposits that form on the outer surfaces to prevent electrolysis problems, rinse with fresh water
and dry the exterior thoroughly
WARNING: The electric motor to internal's winch is not waterproof, resistant to splashing water but not
submerged
For electrical parts to remove oxide on the contacts of this particular motor and contactor/motor starter
with an electrical contact spray and sprinkle with grease.
SPARE PARTS
In order to identify a spare part, examine the exploded drawing (PG.5), determine the code and the required
quantity and order the spare part, making sure to include the serial number shown on the winch
6
MANTENANCE
WARNING BEFORE PERFORMING ANY MAINTENANCE JOBS ON THE WINCH
COMPLETELY DISCONNECT THE POWER SUPPLY TO THE ENTIRE WINCH LINE.
- DO NOT GO NEAR OR BRING OBJECTS NEAR THE WINCH WHILE IT IS OPERATING. DISCONNECT THE POWER SUPPLY WHEN OPERATING
MANUALLY, ALSO WHEN DISENGAGING THE CLUTCH. PERSONS ON BOARD COULD ACCIDENTALLY ACTIVATE THE ANCHOR WINCH WITH THE
REMOTE OR RADIO CONTROL.
OPERATION
- ITALWINCH Winches ITALWINCH were exclusively designed for small to recover TENDER load does not exceed the
value indicated in the tables they are not strong points. Do not use these devices for other purposes: improper use
could cause damage to the anchor winch or injury to persons.
- ITALWINCH assumes no liability for direct or indirect injury or damage caused to persons or property as a result of
improper use.
- The winch has not been designed to hold the craft in severe weather conditions (gales or storms).
- Always switch off the winch when not in use so as to prevent accidental activation.
- Do not exceed the load limit. We recommend aiding the winch during the operations of recovering and casting the
TENDER.
- Make sure there are no bathers or other craft nearby before casting the anchor.
- Always install an appropriate thermal magnetic breaker to protect the circuit and electric motor from overheating
or damage.
- Secure the chain with a fastener (shackle) before starting your boat trip.
- Always keep hands and feet away from the anchor winch while it is operating.
- If the chain gets caught, switch off the anchor winch and try to free the chain, using extreme caution.
- All electrical components (motor, contactor, controllers) must be installed so as to be protected again splashes or
sprays of water.
Summary of Contents for Italwinch ACHILL 500W 12V
Page 4: ......
