
User’s Manual / Manuale Uso Trio.Bas 54
RFID reading point
Punto di lettura RFID
PART 7
–
CYCLE IDENTIFICATION
RFID MODULE /
MODULO RFID
The RFID module incorporated in the instrument used to
read the TAG devices by simply bringing the same to
the point of reading (as shown), during sampling. The
system automatically recognizes the type of identifier
(user, sampling point, Id-sample).
Il modulo RFID incorporato nello strumento consente di
leggere i dispositivi TAG semplicemente avvicinando gli
stessi al punto di lettura (come da figura), durante la
fase di campionamento.
Il sistema riconosce in
automatico il tipo di identificativo letto (utente, luogo di
prelievo, Id-campione).
TRIO.BAS
(Date and Time)
LAST SAMPLE
Place / Volume (l)
OFF CFG
INV
GO!
Press GO! (“
”) to access at sampling menu /
Premere GO!
(“
”) per
accedere al menu di campionamento
User:
Last User
Place:
Last Place
Sample-Id:
(Automatic)
Start sampling
UP
DW
ESC
OK
In automatic mode / In modalità automatica
The display shows the mask with "
User
", "
Place
" of the last sample and
"
Sample-Id
" calculated automatically by the system. Bringing TAG User, Place
and Sample-ID the point for reading are automatically recognized.
Il display visualizza la maschera con
“
User
”, “
Place
” dell’ultimo
campionamento e “
Sample-Id
” calcolato automaticamente dal sistema..
Avvicinare i TAG User, Place e Sample-Id corretti al punto di lettura affinchè
vengano riconosciuti in automatico.
User:
?
Place:
?
Sample-Id:
?
Start sampling
UP
DW
ESC
OK
In secure mode / In modalità sicura
The display shows the mask with "
User
", "
Place
” and "
Sample-Id
" to enter
automatically approaching the TAG device (card, key ring or other) to the built-
in RFID reader.
Il display visualizza la maschera con
“
User
”, “
Place
” e “
Sample-Id
” da inserire
in modo automatico avvicinando il dispositivo TAG (tessera, portachiavi o altro)
al lettore RFID incorporato.
ID recognized
Recognition of User, Place and Sample-Id is automatic and is signaled with the
appropriate message
Il riconoscimento di User, Place e Sample-Id avviene in automatico e viene
segnalato con apposito messaggio