background image

57

56

7.4 Impuls 2 model

Dimensions

Length across leg supports ........................ 102 cm
Height ....................................................... 91 – 105 cm
Width of seat: 38 / 40 / 43 / 46 / 48 cm .... Seat depth: 40 / 42 / 44 cm
Seat depth (2nd frame): ........................... Seat depth: 44 / 46 / 48 cm
Seat width, folded ..................................... 31 cm
Seat height ............................................... 40 – 51 cm
Back height ............................................... 30 – 50 cm
Armrest height .......................................... 19 – 28,5 cm

Seat height and seat angle with 22" or 24" driving wheels

See order form

Tyres/Tyre pressures........................... Standard values

Swivel wheel 4“, 5“, 6“, 7“ ....................... solid
Swivel wheel 7“x 1¾ ................................. 2,5 bar
Swivel wheel 200 x 50 mm ........................ 2,5 bar

Driving wheel 22“ x 1“ ............................. 7,5 bar
Driving wheel 22“ x 1 

3

/

8

“ ......................... 4,5 bar

Driving wheel 24“ x 1“ ............................. 7,5 bar
Driving wheel 24“ x 1 

3

/

8

“ ......................... 4,5 bar

Note:
Always observe the pressure stated on the tyre.

Distance from hand wheel ........................ two positions can be set

Weights

Weight when empty .................................. from 13,9* kg

(depending on model and version)

Max. passenger weight
Seat width up to 46 cm ............................. 130 kg
Seat width 48 cm ...................................... 130 kg (with double cross brace)

* = Seat width 43 cm, without armrests and leg supports

7.3 Impuls 1 Vario model

Dimensions

Length across leg supports ........................ 110 cm
Height ....................................................... 90 – 101 cm
Width of seat: 38 / 40 / 43 / 46 / 48 cm .... Seat depth: 40 / 42 / 44 cm
Seat width, folded ..................................... 31 cm
Seat height ............................................... 41,5 – 52 cm
Back height ............................................... 40 cm
Armrest height .......................................... 23 cm

Seat height and seat angle with 22" or 24" driving wheels

See order form

Tyres/Tyre pressures........................... Standard values

Swivel wheel 4“x 1¼ ................................. solid
Swivel wheel 5“x 1¼ ................................. solid
Swivel wheel 7“x 1¼ ................................. solid
Swivel wheel 7“x 1¾ ................................. 2,5 bar

Driving wheel 22“ x 1“ ............................. 7,5 bar
Driving wheel 22“ x 1 

3

/

8

“ ......................... 4,5 bar

Driving wheel 24“ x 1“ ............................. solid rubber
Driving wheel 24“ x 1“ ............................. 7,5 bar
Driving wheel 24“ x 1 

3

/

8

“ ......................... 4,5 bar

Note:
Always observe the pressure stated on the tyre.

Distance from hand wheel ........................ two positions can be set

Weights

Weight when empty .................................. from 13,0* kg

(depending on model and version)

Max. passenger weight
Seat width up to 46 cm ............................. 130 kg
Seat width 48 cm ...................................... 130 kg (with double cross brace)

* = Seat width 43 cm, without armrests and leg supports

Summary of Contents for Impuls 1


































Reviews: