4 ADJUSTMENTS
Inc. All rights reserved
13
4. ADJUSTMENTS
After adjusting and before using the tilt wheelchair, check that
all hardware is tightly secured. Check that the locking
mechanisms are secure before using the wheelchair.
4.1. LEG SUPPORT ASSEMBLY
4.1.1. ADJUSTING THE LENGTH OF THE LEG SUPPORT ASSEMBLY
1 - Unscrew the hexagon socket screw (
A
) with a 5/32 in. Allen key.
2 - Slide the tube (
B
) to adjust the desired leg support length.
3 - Check that the spacer (
D
) is fully inserted in the stem.
4 - Reposition the clamping ring (
C
) and firmly tighten the screw (
A
).
Adjustments to your wheelchair should only be performed by
health care professionals. Improper adjustments can cause
injury and/or damage to the occupant, the assistant, the
wheelchair, or the environment.
