ORTEC radEAGLE User Manual Download Page 19

Page: 19 / 147

radEAGLE

User Manual

Welcome

1.5.4 Connectors

The

radEAGLE

has several connectors.

When operating under harsh conditions, keep the connectors clean and free of dust
or sand. If you experience connection problems, clean the connector with a cleanser
specialized for electronic components.

USB Mini-B at rear end

Use this plug (Fig.

, p.

, Fig.

, p.

) to connect your

radEAGLE

to a computer. All

common operating systems like Microsoft Windows, MacOS or Linux are supported.

USB-A host connector in the handle

Use this plug (Fig.

, p.

) for Wi-Fi, Bluetooth, USB-to-Ethernet adaptors, or USB

storage devices (all optional).

Power plug on back side

Please align the red dot on the charger cable to that of the plug when connecting
(Fig.

, p.

, Fig.

, p.

, Fig.

140

, p.

114

© innoRIID GmbH • 2019-04-11

Software 3.2.12 • Document 3.3.0o

19/147

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands