Installation of the equipment must comply with local and national electrical
codes.
DANGER!
— DO NOT OPEN EQUIPMENT, UNLESS AUTHORIZED:
The interior of this equipment does not have any user serviceable parts.
Contact Spectracom Technical Support if this equipment needs to be ser-
viced. Do not open the equipment. Follow Spectracom Safety Instructions,
and observe all local electrical regulatory requirements.
Caution:
Electronic equipment is sensitive to Electrostatic Discharge
(ESD). Observe all ESD precautions and safeguards when handling Spec-
tracom equipment.
3.2
Regulatory Compliance
While the Evaluation Kit (EVK) of this product has not been tested against all standards
below, the production version is planned to be in compliance with the following regulatory
publications:
MIL compliance
Tested in accordance with MIL-STD-810G:
MIL-STD 810G, 506.6
MIL-STD 810G, 509.6
MIL-STD 810G, Method 516.7
MIL-STD 810G, Method 514.7 E1 and E2
MIL-461F Testing (EMI/EMC):
MIL-STD-461F CE102 Conducted Emissions, Power Leads
Note: Frequency Range: 10 kHz to 10 MHz; Test Limits: Figure CE102-
1
MIL-STD-461F CS101 Conducted Susceptibility, Power Leads
40
VersaPNT Getting Started Guide Rev. 3.0
3.2 Regulatory Compliance