Orolia Spectracom VelaSync 1232, User Manual

Page: 99 / 268

2.11.1 The PTP Screen
The PTP screen provides PTP status information, and provides access to all configurable
PTP settings.
To access the PTP screen, navigate to MANAGEMENT > NETWORK: PTP Setup . The
PTP screen will open:
Figure 2-10:
VelaSync PTP screen
For each Ethernet port (ETH0-ETH3) you can toggle PTP functionality ON or OFF .
You can also access the "Settings" panel and the "Statistics" panel for each port (see
below).
2.11.1.1 The PTP Settings Panel
The Settings Panel provides access to the configuration settings, divided into three tabs,
which are described below. Each tab allows you to
Restore defaults .
Note: The Restore Defaults button in each PTP Settings panel will restore
ALL the factory defaults for ALL Ethernet ports.
2.11 Configuring PTP
CHAPTER
2
•
VelaSync 1232 User Manual Rev. 4 87