Orolia Spectracom VelaSync 1232, User Manual

Page: 85 / 268

You can search any of the fields for specific information in the Search field at
the top of the window.
A limit of 10 entries will appear on the screen at any one time. If you have
more than 10 clients, you can move through the table using the
First , Pre-
vious , Next and Last navigation buttons at the bottom of the screen.
2.10.5 Restoring the Default NTP Configuration
The VelaSync default NTP configuration can be restored at any time. It comprises basic set-
tings such as Stratum 1 operation with no other servers or peers, no broadcasting and no
access restrictions. External queries or modifications are not permitted, while generally all
IPv4 and IPv6 client connections are allowed.
To restore VelaSync to its default NTP configuration:
1. Navigate to MANAGEMENT > NETWORK: NTP Setup .
2. In the NTP Actions panel, click Restore Default NTP Configuration .
3.
In the dialog window that displays, click OK .
2.10.6 NTP Output Timescale
You can choose the timescale VelaSync will use for the time stamps it sends out to its NTP
clients and network nodes. This is done by setting VelaSync
System Time timescale. The
options are UTC, TAI and GPS. Typically, UTC is used for network synchronization.
2.10 Configure NTP
CHAPTER
2
•
VelaSync 1232 User Manual Rev. 4 73