Orolia Spectracom VelaSync 1232, User Manual

Page: 77 / 268

4.
Apply your changes and click Submit . OR: Click Delete to remove the User.
2.9.7.3 SNMP Traps
SNMP traps allow for automatic event notification, and as such are one way to remotely
monitor VelaSync's status.
SNMP traps indicate the status change that caused the trap to be sent and may also
include one or more objects, referred to as variable- bindings, or
varbinds . A varbind
provides a current VelaSync data object that is related to the specific trap that was sent.
For example, when a Holdover trap is sent because VelaSync either entered or exited the
Holdover mode, the trap varbind will indicate that VelaSync is either currently in Holdover
mode or not currently in Holdover mode.
For testing purposes, a command line interface command is provided. This command,
testevent
, allows one, several, or all of the traps defined in the VelaSync MIB to be gen-
erated. Refer to "CLI Commands" on page 216 for command details.
To define SNMP Traps (Notifications):
1.
Navigate to MANAGEMENT > NETWORK: SNMP Setup .
2.
In the SNMP Traps panel, click the PLUS icon in the top-right corner.
3. The SNMP Traps Settings window will display:
2.9 Configuring Network Settings
CHAPTER
2
•
VelaSync 1232 User Manual Rev. 4 65