1.8
YOUR SAFETY
This product has been designed and built in accordance with state-of-the-art standards
and the recognized safety rules. Nevertheless, its use may constitute a risk to install-
ation/maintenance personnel if used under conditions that must be deemed unsafe, or if
the warnings and precautions explained below are ignored.
Additional Safety Notes pertaining to hardware installation can be found under
.
1.8.1
SAFETY: Symbols Used
Note:
The following symbols may be found in Spectracom technical doc-
umentation, or on Spectracom products:
Table 1-3:
Spectracom safety symbols
Symbol
Signal word
Definition
DANGER!
Potentially dangerous situation which may lead to per-
sonal injury or death! Follow the instructions closely.
CAUTION!
Potential equipment damage or destruction!
Follow the instructions closely.
NOTE
Tips and other useful or important information.
ESD
Risk of Electrostatic Discharge!
Avoid potential equipment damage by following ESD Best
Practices.
CHASSIS GROUND
This symbol is used for identifying the functional ground
of an I/O signal. It is always connected to the instrument
chassis.
Analog Ground
Shows where the protective ground terminal is con-
nected inside the instrument. Never remove or loosen
this screw!
Recycle
Recycle the mentioned components at their end of life.
Follow local laws.
1.8 YOUR SAFETY
CHAPTER
1
•
VelaSync 1232 User Manual Rev. 4
17
Summary of Contents for Spectracom VelaSync 1232
