Orolia Spectracom VelaSync 1232, User Manual

Page: 23 / 268

HDD : IDE channel activity when flashing yellow
Power : Power is applied to power supplies (bright green)
1.5.3 Hard Disk Drives
Each hard disk drive (HDD) carrier has two LEDs:
Green LED : Indicates drive activity, when illuminated.
Red LED :
When blinking , the drive is rebuilding.
When solid , indicates drive failure (you should also receive an automatic mes-
sage from your system management software).
To release a hard disk drive carrier, in order to remove the hot-swappable hard disk drive,
push the red button for the carrier to release the lever, then pull the carrier out, using the
lever.
For additional instructions on how to replace a hard disk, see "Removing/Installing a Hard
Disk Drive" on page 164 .
1.5 Front Panel Overview
CHAPTER
1
•
VelaSync 1232 User Manual Rev. 4 11