Orolia Spectracom VelaSync 1232, User Manual

Page: 22 / 268

1.5 Front Panel Overview
Figure 1-2:
Front Panel (bezel removed)
1.5.1 Control Buttons
UNIT ID ("UID"): Unit identifier button – to identify this unit, press this button (or
activate via IPMI) to turn the blue "i" LED in front and back of unit on/off.
RESET button : Reboot the system
Power button : Apply/remove power from the power supply of the server. ( Note :
Standby power continues to be supplied to the system, i.e. the power supplies and
the IPMI remain energized)
HDD Release Lever : Pull to release one of the two hot-swap RAID hard disks.
1.5.2 Control Panel LEDs
Info (red):
Red blinking fast (1x/sec): Fan fail
Red blinking slowly (1x/4 sec): Power fail
Red solid : CPU overheat
Info (blue):
Blue solid : Local UID button depressed
Blue blinking : UID has been activated via IPMI
NIC 2, 1 : Activity on GLAN 1,2 when flashing green
10
CHAPTER
1
•
VelaSync 1232 User Manual Rev. 4
1.5 Front Panel Overview