4.6.2
Creating a Login Banner
A login banner is a customizable banner message displayed on the login page of the
VelaSync Web UI. The login banner can be used, for example, to identify a unit.
Figure 4-4:
Login banner (example)
To configure a login banner:
1.
Navigate to the
MANAGEMENT > Network Setup
screen.
2.
In the
Actions
panel on the left, click
Login Banner
.
3.
The
Network Access Banner
window will display. Check the box
Enable Custom
Banner
.
4.
In the
Plain Text Banner
text box, type in your custom text.
Note:
The
Plain Text Banner
is used to create a message for all inter-
active login interfaces (Web UI, telnet, SSH, FTP, SFTP, serial, etc.). It
is not required to include HTML tags.
5.
Optionally, you may also use the
Web Interface Banner
text box.
Note:
Enabling and using the
Web Interface Banner
text box will
allow you to apply HTML formatting tags to your message (e.g.,
col-
ors
). Note that this functionality is limited to browser-based Web UI
4.6 Miscellanous Typical Configuration Tasks
CHAPTER
4
•
VelaSync 1232 User Manual Rev. 4
185
Summary of Contents for Spectracom VelaSync 1232
