Orolia Spectracom VelaSync 1232, User Manual

Page: 135 / 268

The GNSS receiver analyzes the incoming GNSS data stream and supplies the GNSS time
and 1PPS (Pulse-Per-Second) signal to VelaSync's timing system. The timing system uses
the data to control the System Time and discipline the oscillator.
While VelaSync’s default GNSS receiver configuration will likely be adequate for most
applications, it is advisable that you review the options and change settings as needed, par-
ticularly if you are experiencing poor signal reception.
To access the GNSS Receiver settings:
1.
Navigate to INTERFACES > REFERENCES: GNSS 0 .
Note: Typically, there will be only one GNSS reference, numbered
"0".
2.
The GNSS 0 status window will open. To open the configuration window, click Edit
in the bottom-left corner.
OR:
1. Navigate to INTERFACES > REFERENCES: GNSS Reference .
2.
Click on the INFO button, or the GEAR button to configure the GNSS settings, or
review GNSS reference status information.
3.3.3.1 Reviewing the GNSS Reference Status
To view the current status of your GNSS reference:
3.3 Managing References
CHAPTER
3
•
VelaSync 1232 User Manual Rev. 4 123