Figure 3-1:
How the System Time is derived
Note:
User hand-set times can only be set in UTC (not Local time).
3.2.1
System Time
Several System Time parameters can be customized:
The
System Timescale
can be changed.
A
user-defined time
can be setup for e.g., for simulation purposes, or if no external
reference is available.
The
battery-backed
RTC time can be used as System Time, until an external ref-
erence become available.
3.2.1.1
Configuring the System Time
To configure the System Time:
1.
Navigate to
MANAGEMENT > OTHER: Time Management
.
2.
In the
System Time
panel located in the top-left corner of the
Time Management
screen, click the GEAR icon.
3.
The
Edit System Time
pop-up window will display.
In the
System Timescale
field select a timescale from the drop-down list.
The options are:
96
CHAPTER
3
•
VelaSync 1232 User Manual Rev. 4
3.2 System Time
Summary of Contents for Spectracom VelaSync 1232
