Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 96 / 392

Figure 3-21:
GPS Constellation configuration (StudioView)
This functionality may be required for the configuration of scenarios taking place in
the past, or 'What-if' scenarios.
Consider the following when configuring satellite constellations:
The selected satellite constellation will impact the navigation message to mimic
the type of simulated satellite.
The satellite type will also impact the types of RF signals generated (see "Fre-
quency Bands and Signal De-/Activation" on page 76 ), i.e. for the signal type L2C
to be transmitted, the satellite type must be Block IIR-M (or higher), for L5 to be
transmitted, the satellite type must be of type Block IIF (or higher), etc.
Possible settings are:
For GPS:
II
IIA
IIR
Block IIR-M
IIF
80 User Manual GSG-5/6 Series Rev. 27
3.5 "Select" Menu