Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 316 / 392

Parameter
string - 1002, 1004, 1006, 1010, 1012 and 1033.
Example
SEND:
SOURce:SCENario:RTCMCFG 3x,1004,1006
6.3.3.83 SOURce:SCENario:RLM
Function
This command supports the Galileo Return Link Acknowledgement Service by sending out
a
Return Link Message to a user in distress, thereby informing him that his distress signal
has been detected and located. For more information, see "RLS (Return Link Service)"
on page 186 .
The SCPI command is available in two variants:
Command Syntax
Short RLM message:
SOURce:SCENario:RLM 0,satID,int1,int2,int2,int4
Long RLM message
SOURce:SCENario:RLM 1,satID,int1,int2,int3,int4,int5,int6,int7,int8
Parameters
RLM [x]:
0 = short message; 1 = long message
satID
: The satellite chosen to transmit the message (PRN).
int1...0
: an unassigned decimal integer, representing 20 bits of RLM (SAR) data trans-
mitted within the INAV page, as illustrated below:
300 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference