Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 279 / 392

Example
SEND:
SOURce:SCENario:LOAD scen01.scen
6.3.3.40 SOURce:SCENario:LOAD?
Function
Query the current loaded scenario.
Command Syntax
SOURce:SCENario:LOAD?
Example
SEND:
SOURce:SCENario:LOAD?
READ:
scen01.scen
6.3.3.41 SOURce:SCENario:CONTrol
Function
Control the execution of the scenario.
Command Syntax
SOURce:SCENario:CONTrol <START|STOP|HOLD|ARM>
Notes
The scenario must be loaded beforehand using
SOURce:SCENario:LOAD
.
Calling a START command will first automatically stop any running scenarios. HOLD can be
used to pause and resume trajectory movement, not the entire scenario. HOLD is effective
when a scenario is running.
ARMing a scenario means to hold a scenario before it is started.
6.3 Command Reference
User Manual GSG-5/6 Series Rev. 27 263