Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 250 / 392

Returned format
<Integer>
Where:
0
= No error
1
= Error in reference clock
6.3.1.12 *WAI
Wait-to-continue
The Wait-to-Continue command prevents the device from executing any further com-
mands or queries until execution of all previous commands or queries have been com-
pleted. It differs from the *OPC? command in that it blocks within the GSG. It also resumes
operation and allows synchronous execution of a command sequence within the GSG
10Hz epoch.
Example
SOURce:SCENario:CONTrol start;*WAI;SOURce:SCENario:LOG?
Wait until scenario is running and then request NMEA position.
RSG Example
SEND:
*WAI?
SEND:
SOURce:SCENario:VELocity 123.400,27.25, 210.8000
SEND:
SOURce:SCENario:PRYRate 123.400,-2.0000,2.0000,1.0000
Wait until the next 100 msec interval and issue the following commands.
6.3.2 SYSTem: Subsystem Commands
234 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference