Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 248 / 392

6.3.1.8 *SRE
Service Request Enable
Sets the service request enable register bits. This enable register contains a mask value for
the bits to be enabled in the status byte register. A bit that is set true in the enable register
enables the corresponding bit in the status byte register to generate a Service Request.
Command Syntax
*SRE <Decimal data>
Parameters
<dec.data> = the sum (between 0 and 255) of all bits that are true.
Service Request Enable Register (1 = enable)
Bit Weight Enables
7 128 OPR, Operation Status
6 64 RQS, Request Service
5 32 ESB, Event Status Bit
4 16 MAV, Message Available
3 8 QUE, Questionable Data/Signal Status
2 4 EAV, Error Available
1 2 Not used
0 1 Device Status
Returned format
<Integer>
Where:
<Integer> = the sum of all bits that are set.
Example
*SRE 1
6
In this example, the device generates a service request when a message is available in the
output queue.
232 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference