Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 184 / 392

DO NOT start the scenario via the GSG unit
, since the RINEX navigation data will not be
captured! (Unless you manually submitted the SCPI navigation data logging command.)
Once data starts to be generated, the Data Recorder will display the incoming raw data in
the bottom section of the Data tab. Under the
View tab (top-left corner of the screen) you
can also visually display the progress in real-time on the Google Map and see a skyplot with
all visible satellites, as well as velocity and altitude charts.
4.9.14.5 Processing Recorded Data for Playback
Note: This is an optional feature for which the Record and Playback option
(OPT-RP) is required.
Part of the StudioView Record & Playback workflow (see "Record and Playback" on
page 163 ) is to augment and convert the data previously recorded (see "Recording Data
with StudioView" on page 165 ) so that it can be played back as a scenario on a GSG unit.
This conversion is done with the StudioView Scenario Generator tool.
The Scenario Generator translates the GGA, RMC and GSV sentences
1
contained in the
NMEA into a syntax that is used by GSG scenario, trajectory and event files. These files are
required to playback the recorded data on a GSG unit.
Note: The GSG unit requires an internet connection to replay the recorded
data.
Generating the Scenario Playback Data
In order to generate the playback data, it is necessary to have a GSG with the Record and
Playback Option (OPT-RP) enabled connected to the PC running StudioView.
1.
In StudioView, navigate to Tools > Scenario Generator , or click . The Scenario
generator dialog window opens:
1
For example, the GGA and RMC sentences contain position, speed, heading and altitude information, while the GSV sen-
tences record which satellites had been in view and what had been their power levels at any given time during the tra-
jectory.
168 User Manual GSG-5/6 Series Rev. 27
4.9 Studioview Tasks