NTP client unable to set time
In the event that GSG cannot resolve the NTP server address, upon start-up, the error mes-
sage NTP client unable to set time will be displayed:
1.
Confirm the message by pressing
enter
, and navigate to:
2.
Network configuration
view,
Options
>
Interface and Reference
> Select
Inter-
face Type
:
Ethernet
.
3.
Then highlight the menu item
Network
, and press
enter
; the
Network con-
figuration
screen will be displayed. Highlight the menu item
NTP server
, and press
enter
.
4.
Enter a valid NTP address, or—if the IP address is correct—navigate up to
Network
configuration
, and verify that the appropriate static IP address and gateway are
selected so that GSG can resolve the path to the NTP server.
Download Server
The download server for the GPS ephemeris and almanac data can be configured under:
Network configuration
>
Options
>
Interface and Reference
> [
Interface Type
: set to
Ethernet
.] >
Network
>
Network configuration
:
Download server
.
The choices are
Default
, and [
user-entered custom address
].
For more information on automatic download of ephemeris and almanac data see
.
Note:
In order for the
ephemeris download
to work, the correct DNS
address must specified, either by setting
Options
>
Interfaces and Refer-
ence
>
Network
>
Obtain IP autom.
=
Yes
, or—when using a static IP con-
figuration—by manually entering the correct DNS address.
3.6.3.2
Proxy Configuration
If your GSG unit is used in a network behind an HTTP proxy, access to the proxy can be con-
figured as described below:
1.
To access the
Proxy configuration
view, navigate to
Options
>
Interface and
Reference
>
Proxy
.
100
User Manual GSG-5/6 Series Rev. 27
3.6 "Options" Menu
Summary of Contents for GSG-5 Series
Page 2: ......
Page 4: ...Blank page II User Manual GSG 5 6 Series...
Page 42: ...BLANK PAGE 2 5 Signal Power Level Considerations 26 User Manual GSG 5 6 Series Rev 27...
Page 382: ...BLANK PAGE 6 7 Revision History SCPI Guide 366 User Manual GSG 5 6 Series Rev 27...