WARNINGS
-
Carefully read the instructions in this manual before using the device;
they will
help you use the product safely and keep it in good working order. It is an integral
part of the product and should be kept for future reference
-
The manual is intended for technically qualified retailers, those who use the
product and those who assist them;
it provides instructions for using the product
correctly and must be supplemented by adequate knowledge of the rehabilitation
program for which it has been prescribed
-
The manual reflects the technical state of the product at the time it was sold.
ORMESA reserves the right to make any changes to the product or manual
suggested by experience, technical considerations or regulatory developments
without any obligation to update its previous production and relevant manual
-
JUDITTA wheelchair may be only used by persons
who have read the rules and
instructions in this manual
-
The doctor must check that the use of JUDITTA wheelchair and its accessories
conforms to current laws, regulations and standards
-
The wheelchair must be used by persons of the BODY SIZE AND WEIGHT
specified in the paragraph “TECHNICAL FEATURES” on pages 19, 20,21 and 22
-
The wheelchair must be guided by persons of suitable height and weight
to
control its movements
- Before each use
, always check that the brakes are working, the wheels are not
excessively worn and that the headrest, back and footrest are locked
-
When pausing, always lock both brakes,
even on level ground
-
Always lock the brakes before the user gets in or out of the wheelchair and
before making any adjustments!
-
The upholstery is fireproof
in conformity with the UNI 1021-1/2 standard.
Nevertheless, keep it away from cigarettes, matches, fireplaces and open flame in
general
-
Keeping the cushion and patient clean will prevent bedsores
4/86
Summary of Contents for Juditta B12
