User Manual
ORION UniBeam (Red)
[ORLASER6]
Warnings
For indoor use only.
Use with a grounded mains power supply.
Locate on a flat surface away from moisture and vibration.
Caustic chemicals or liquids can cause damage to the housing.
Operating temperature: < 40°C
Continuous use for more than 4 hours may shorten the product’s lifespan.
Use cleaning tissue to remove dust on the lenses to optimize light output.
Do not remove or break the warranty label.
Do not disassemble the fixture yourself. Please consult a qualified technician for
service and repair.
Fuse Replacement:
Disconnect the unit from the mains power supply. Unscrew the fuse holder with a
flat head screwdriver. Remove the old fuse and replace it with the same type of fuse.
CAUTION:
Always replace with the correct type of fuse – anything other than the
specified fuse can cause fire or electric shock, damage your unit, and void your warranty.
Specifications
Power voltage:
AC220 V/ 50 HZ
Power:
20W.
Laser Wavelength:
650nm, Red Laser Power: 80mw
Stepper motor,
X/Y scanning
More than 60 graphics and 200 effects
Operating modes:
Sound Active, Auto.
Net weight:
3 KG
Size:
237mm x 176mm x 162 mm
CAUTION
LASER RADIATION AVOID EXPOSURE
TO BEAM CLASS 3B LASER PRODUCT
