6
STAND UNIT
7
Infinitely Expandable
S
TAND UNIT
Installing the stand (3*3)
2.
Connect the Foot Stand and Stand Support together.
1
When assembling, put the Foot Stand down to prevent it from falling.
y
Attach the Stand Support to the upper and lower parts of the Foot Stand
y
After assembling, check if it would stand on its own.
y
Top
※ It is more convenient to distinguish
top and bottom, if you put the main
frame as shown in the figure to use
the holes as indicators.
Bottom
STAND.FOOT
STAND.SUPPORT
After inserting M8 NUT, apply
the M8*12 bolt with the enclosed
6mm wrench.
Hook the main Frame to the lower part of the Stand.
2
Assemble the Main Frame from the lower to the upper part.
y
Insert the M6*70 bolt to the Main Frame and Stand Hook.
y
If the M6*70 bolt was not inserted, the Main Frame would fall or be damaged.
y
M8.NUT
M8*12L
M6*70
Summary of Contents for MPDP
Page 24: ...44 WALL UNIT MEMO ...
