26
WALL UNIT
27
Infinitely Expandable
W
ALL UNIT
924.5mm
486.7mm
370.6mm
40mm
486.7mm
40mm
40mm
924.5mm
Install the Wall Bracket.
1
Mark the location on the wall where the Bracket will be installed according to the number of
y
set and gap.
To install the Wall Bracket on the lowest part of the Main Frame, choose two areas at the upper
y
and lower parts for each set. Install the Wall Brackets facing each other at the bottom portion.
Drill holes where the Wall Brackets will be installed using a drill and install the anchor bolts
y
(3/8”). Attach with Wall Brackets and nuts.
Make sure that the horizontal and vertical lines are balanced when working.
¹
Installing the Wall Bracket (3 X 3)
4.
ANCHOR.BOLT.(3/8")
Install the Wall Brackets at the bottom
facing the upper parts.)
ANCHOR.BOLT
40mm
ANCHOR.BOLT.
Attach the anchor bolts (3/8") and Wall
Brackets into the wall.
Top
※ It is more convenient to distinguish top
and bottom, if you put the main frame
as shown in the figure to use the holes
as indicators.
Bottom
Hook the Main Frame at the lower part of the Wall Bracket.
2
Assemble the Main Frame starting from the lower to the upper part.
y
Insert M6*70 bolts to the Main Frame and the Wall Bracket.
y
If the M6*70 bolt was not inserted, the Main Frame would fall or be damaged.
y
M6*70
Summary of Contents for MPDP
Page 24: ...44 WALL UNIT MEMO ...
