ORION MINI-REP V2
CONVENTIONAL
REPEATER PANEL
MANUAL 210609
MADE IN PORTUGAL - EU
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL | Tel: +351 289 896 560
Email: [email protected] | Technical Support: [email protected] | www.globalfire-equipment.com
INSTALLATION, OPERATION & MAINTENANCE MANUAL
GENERAL DESCRIPTION
The ORION MINI-REP V2
will provide remote control and system display status from multiple locations, to an ORION based
Conventional Fire Alarm System. Its reduced dimensions make it ideal for installation in reception areas or security booths
where it would be impractical and unattractive to install a full size control panel. ORION MINI-REP V2 can be connected to
the ORION Conventional Panel using 4 different interconnecting technologies: RS232, RS485, (Fiber Optics and TCP/IP
options are under development).
The unit is provided as standard with an RS232 interface. Power for the ORION MINI-REP V2 can be supplied from the
control panel’s auxiliary power output or from an external 24 Volt DC power supply if required.
IMPORTANT SAFETY NOTES
●
This equipment must
only be installed and maintained by a suitably qualified and technically competent person.
●
A basic knowledge and training in the installation of Fire Detection Systems is assumed.
●
The Fire Detection System should be designed by a suitably qualified person with reference to the Local Regulations
and Guidance from the fire Officer where applicable.
●
All wiring should be carried out with no power present in any part of the Fire Detection System.
COMPATIBILITY NOTE
ORION-MINI REP V2 repeater panel is only compatible with ORION panels that exhibit the following sequential LED
pattern during RESET.
ORION MINI-REP V2 / Installation, Operation & Maintenance Manual / © GFE 210609
1
