VANDAL-PROOF & WATERPROOF
3-AXIS DOME CAMERA
GST-410
MANUAL
◐ HOW TO INSTALL
1. Camera installation
<Ceiling mount>
<Wall mount>
(1) Fix the camera set with the supplied screws on ceiling or wall
mount. If you don't use supplied screws, the camera may fall off.
(2) Please refer to '3. Camera angle adjustment' regarding adjust
camera angle.
(3) Lens adjustment(Vari-focal Lens only)
① By turning the "Tele-Wide" knob,
you can access a range of focal
lengths within specified limits.
② Since then, by turning the "Near-Far"
knob, you can set the focus toward
The wanted object.
(4) Re-assemble the camera.
SCREW Tp1 4x25 3EA
MOUNT HOLE PLATE(STICKER)
SCREW Tp1 4x25 3EA
MOUNT HOLE PLATE(STICKER)
Put a sticker on the ceiling and make holes
according to the spots marked on a sticker.
Put a sticker on the wall and make holes
according to the spots marked on a sticker.
Ø3.5 Ø30
Ø3.5
Ø30
2. Pipe application
. Camera angle adjustment
(1) Remove the screw for fixing a cable on the bottom of the base.
(2) Open the DOME COVER.
(3) Remove the TAP COVER and place the cables there.
(4) After distributing cables, use the TEPLON tape to wipe the pipe.
(5) Combine the pipe to the base.
: Grasp the disk of camera and then adjust
direction to the right or left(-160 ~ 190 )
: Grasp the camera holder and then adjust
direction to the up or down(6 ~ 90 )
: Grasp the camera holder and then rotate
(-178 ~ 178 )
<Caution>
If you don't wipe TEFLON tape on pipe, it might cause troubles on
water-resistant.
3
:
(1) Pan adjustment
(2) Tilt adjustment
(3) Roll adjustment
˚
˚
˚
˚
˚
˚
◐ DIMENSION
<Caution>
If you try to adjust the camera out of limited angle, it might cause
troubles and damage to camera.
CABLE
PIPE
TEFLON TAPE
TAP COVER
CABLE FIXING SCREW
DOME COVER
Ø100
Ø150.5
Ø129
ROTATION
U
D
R
L
DISK
CAMERA HOLDER
CAMERA
MODULE ASS'Y
◐PRECAUTION
◐FEATURES
1. You can install the camera indoors or outdoors.
2. Choose an ideal location for the camera, since a camera unit must
be protected against vibration.
3. Be careful not to scratch the camera unit, especially lens or dome
cover.
4. Use the camera within the temperature(-10℃ ~ +50℃).
5. Avoid any direct sun light toward the lens.
6. Use the AC adaptor 12V DC, 300mA regulated.
1. This camera is incredibly flexible to install with its 3-axis camera con-
struction, which makes the camera ceiling, wall or slope mountable.
2. IP67(Waterproof)
3. Durable material : Body - Aluminum, Dome - Polycarbonate
4. Supreme Resolution(600 TV-Line)
5. Electronic Day & Night function
6. Support 4 different privacy zone
7. DWDR(Digital Wide Dynamic Range)
8. Multi function : High Light Mask, Lens Shading Compensation, Motion
Detection
9. Multi-language full OSD support.
If the product is to be put out of operation definitively,
take it to a local recycling plant for a disposal which
is not harmful to the environment.
