Orion FLEX HPA, Manual, Page: 112 / 166

Machine Manual Orion
Flex Stretchwrapper Revision 3.0
Maintenance 15 February 2016
Page 5-2
Tower Raceways Maintenance
The film distributor (carriage) is sliding on the plastic guides attached behind its back
plate. The section of the tower on which the plastic guides move (raceways) should be
cleaned and re-greased approximately every 600 hours of machine operation.
Note:
If the machine works in a dusty and corrosive environment, the race-
ways should be re-greased more often (at least every 100 hours).
Chain Maintenance
To clean the stretch chain, wipe it with an oily cloth once a service.quarter.
When machine is working in a dusty and damp environment, it may be necessary to repeat
the cleaning operation more often.
Regarding chain lubricants please use the most common chain lubricants on the market.
With time, the chain will tend to stretch.
The tower is equipped with automatic chain tensioner and does not need any adjustment.
Note:
First chain tension inspection must be done after the first two weeks
of machine usage.