TRGPS-9084GT-M12X-BP2-MV User
Manual
ORing Industrial Networking Corp
11
H
ardware Installation
3.1 Wall-mount Installation
Wall-mount Measurement (Unit = mm)
Follow the steps below to mount the switch to the wall.
Step 1: Install left and right front mounting brackets to the switch using 4 M3 screws on each
side provided with switch.
Step 2: With front brackets orientated in front of the rack, nest front and rear brackets together.
Fasten together using remaining M4 screws into counter sunk holes.
Step 3: Fasten the front mounting bracket to the front of the rack.