TGPS-9164GT-M12 Series User
Manual
ORing Industrial Networking Corp
102
Telnet
Check to enable management via a Telnet interface
SNMP
Check to enable management via a SNMP interface
Delete
Check to delete entries
5.8.2 Device Binding
Device binding is ORing's proprietary technology which binds the IP/MAC address of a device
with a specified Ethernet port. If the IP/MAC address of the device connected to the Ethernet
port does not conform to the binding requirements, the device will be locked for security
concerns. Device Binding also provides security functions via alive checking, streaming check,
and DoS/DDoS prevention.
Label
Description
Mode
Indicates the device binding operation for each port. Possible modes
are:
---
: disable
Scan
: scans IP/MAC automatically, but no binding function
Binding
: enables binding. Under this mode, any IP/MAC that does
not match the entry will not be allowed to access the network.
Shutdown
: shuts down the port (No Link)
Alive Check
Active
Check to enable alive check. When enabled, switch will ping the
device continually.
Alive Check
Status
Indicates alive check status. Possible statuses are:
---
: disable
Got Reply
: receive ping reply from device, meaning the device is still
alive
Lost Reply
: not receiving ping reply from device, meaning the device
might have been dead.
Stream Check
Active
Check to enable stream check. When enabled, the switch will detect
the stream change (getting low) from the device.
