ORiNG TES-3080-M12 Series, User Manual

Page: 106 / 111

TES-3080-M12(-BP2) User Manual
ORing Industrial Networking Corp 105
name of image.
6.13 Commands Set List—SYSLOG, SMTP, EVENT command
set
TPS-3082GT-BP1
Commands
Level Description Example
systemlog ip
[IP address]
G Set System log server
IP address.
switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G Specified the log
mode switch(config)# systemlog mode
both
show systemlog E Display system log. Switch>show systemlog
show systemlog P Show system log
client & server
information
switch#show systemlog
no systemlog G Disable systemlog
functon switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address]
G Configure SMTP
server IP switch(config)#smtp serverip
192.168.1.5
smtp authentication G
Enable SMTP
authentication switch(config)#smtp authentication
smtp account
[account]
G Configure
authentication
account switch(config)#smtp account User
smtp password
[password]
G Configure
authentication
password switch(config)#smtp password
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address switch(config)#smtp rcptemail 1
Alert@test.com
show smtp P Show the information
of SMTP switch#show smtp
no smtp G Disable SMTP
function switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event
type switch(config)#event
device-cold-start both
event G Set Authentication switch(config)#event