35.50
44.00
8.00
20.00
24.00
32.0
5.50
R3.25
25.50
2.50
4.30
17.80
30.20
82.00
342.00
58.8
ACPower
SWITCH
49.0
3.0
AC100-240V
50-60HZ
PW1
44.00
431.00
G2
G4
G6
G8
G1
G3
G5
G7
LINK/ACT
Console
RGPS-92222GCP-NP-E
R.M.
Ring
Reset
10/100/
1000T
Fault
100/1000X
G10
G12
G14
G16
G9
G11
G13
G15
G18
G20
G22
G17
G19
G21
G23
G24
PW1
14.2
Quick Installation Guide
Version 1.0
Q
uick
I
nstallation
G
uide
Introduction
PRINTED ON RECYCLED PAPER
RGS-92222GCP-NP Series
Q I G
RGS-92222GCP-NP Series
1907-2-29-RGS92222GCPNP-1.0
The
which consist of
, and
, are managed Ethernet switches designed for
industrial applications.
uring 22 10/100/1000Base-T(X) ports, 2
Gigabit combo ports and 2 100/1000Base-X SFP ports, the series is
able to meet the needs for high port density and high-speed, long-
distance transmission. The
is an enhanced model
with dual DC inputs and relay output. With complete support for Ethernet
redundancy protocols such as O-Ring (recovery time < 30ms over 250 units
of connection) and MSTP (RSTP/STP compatible), the series can protect
your mission-critical applications from network interruptions or temporary
malfunctions with its fast recovery technology. Featuring a wide operating
temperature from -40 C to 75 C, the device can be managed centrally and
conveniently via Open-Vision, web browsers, Telnet and console (CLI)
configuration, making it one of the most reliable choice for highly-managed
and Fiber Ethernet power substation and rolling stock application.
RGS-92222GCP-NP series
RGS-92222GCP-NP
RGS-92222GCP-NP-E
RGS-92222GCP-NP-E
Feat
o
o
Dimension
Panel Layouts
1. Console port
2. Reset button
3. Power indicator
4. Ring status LED
5. RM status LED
6. LAN ports
Front View
Rear View
Installation
Rack-mounting
Step 1:
Step 2:
Install left and right front mounting brackets to the switch using four screws on each side.
With front brackets orientated in front of the rack, fasten the brackets to the rack using two
more screws.
Network Connection
Package Contents
M A N A G E D
Rack-Mount
GIGABIT
SWITCH
Managed Gigabit Ethernet Switch
1
2 3 4 5
6
9
10
11
12
7. LED for Ethernet ports link/act status
8. LED for Ethernet ports Speed indicator
9. First Gigabit combo port
10. Second Gigabit combo port
11. SFP ports
12. LNK/ACT LED for SFP ports
13. Fault indicator
1
2
1. Power switch
2. AC power input (100V~240V
/ 50~60Hz)
3. Dual DC power inputs
The switch provides standard Ethernet ports. According to the link type, the switch uses CAT
3,4,5,5e UTP cables to connect to any other network devices (PCs, servers, switches,
routers, or hubs). Please refer to the following table for cable specifications.
Cable Types and Specifications:
Cable
Type
Max. Length
Connector
10BASE-T
Cat. 3, 4, 5 100-ohm
UTP 100 m (328 ft)
RJ-45
100BASE-TX
Cat. 5 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
1000BASE-T
Cat. 5 / Cat. 5e 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
With 10/100BASE-T(X) cables, pins 1 and 2 are used for transmitting data, and pins 3 and 6 are
used for receiving data. The device also supports auto MDI/MDI-X operation. You can use a
cable to connect the switch to a PC
For pin assignments for different types of cables, please refer to the following
tables.
Contents
QIG
CD
Console Cable
RGS-92222GCP-NP
or
RGS-92222GCP-NP-E
RGS-92222GCP-NP
Rack-mounted
kit (L&R)
Pictures
Number
X 1
X 1
X 1
X 1
X 1
Power Cable
X 1
Preparation
Before you begin installing the switch, make sure you have all of the package
contents available and a PC with Microsoft Internet Explorer 6.0 or later, for
using web-based system management tools.
Elevated Operating Ambient:
If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
Safety & Warnings
Reduced Air Flow:
Mechanical Loading:
Circuit Overloading:
Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Consideration should be given to the connection of the equipment to
the supply circuit and the effect that overloading of the circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of equipment nameplate ratings
should be used when addressing this concern.
44.00
443.70
58.00
42.70
26.70 24.00
24.00
30.20
3.90
R3.50
19.00
3.70
4.30
17.80
30.20
238.00
15.90
6.60
200.00
G2
G4
G6
G8
G1
G3
G5
G7
G9
G11
G13
G15
G10
G12
G14
G16
G17
G19
G21
G23
G18
G20
G22
G24
LINK/ACT
Console
10/100/
1000T
AC100-240V
50-60HZ
215.5
49.0
3.0
RGS-92222GCP-NP
Reset
R.M.
Ring
PWR
G23
G25
G26
100/1000X
AC 100-240V
50-60 HZ
G2
G4
G6
G8
G1
G3
G5
G7
G9
G11
G13
G15
G10
G12
G14
G16
G17
G19
G21
G23
G18
G20
G22
G24
LINK/ACT
Console
10/100/
1000T
RGS-92222GCP-NP
Reset
R.M.
Ring
PWR
G23
G24
G25
G26
100/1000X
7 8
10/100Base-T(X) RJ-45 port
Pin Number
Assignment
#1
TD+
#2
TD-
#3
RD+
#6
RD-
1000Base-T RJ-45 port
Pin Number
Assignment
#1
BI_DA+
#2
BI_DA-
#3
BI_DB+
#4
BI_DC+
#5
BI_DC-
#6
BI_DB-
#7
BI_DD+
#8
BI_DD-
RGS-92222GCP-NP-E
Rack-mounted
kit (L&R)
X 1
RGS-92222GCP-NP
RGS-92222GCP-NP-E
G24
G23
G25
G26
G24
PW2
PW3
G2
G4
G6
G8
G1
G3
G5
G7
LINK/ACT
Console
RGPS-92222GCP-NP-E
R.M.
Ring
Reset
10/100/
1000T
Fault
100/1000X
G10
G12
G14
G16
G9
G11
G13
G15
G18
G20
G22
G17
G19
G21
G23
G24
PW1
G23
G25
G26
G24
PW2
PW3
1
2 3 4 5
6
9
11
12
7 8
10
13
RGS-92222GCP-NP-E
RGS-92222GCP-NP
AC Power SWITCH
AC 100-240V
50-60HZ
PW1
1
2
3
RGS-92222GCP-NP-E
RGS-92222GCP-NP
V+
V-
V-
V+
3A@24V
DCPower
48V
PW2
PW3
V+
V-
V-
V+
3A@24V
DC Power 48V
PW2
PW3
