IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
58
IP Guard – Super-IP List
IP Guard is an intelligent and easy use function for IP security. It could protect the network
from unknown IP( the IP not in allowed list) attack. The illegal IP traffic will be blocked.
The following table describes the labels in this screen.
Label
Description
IP
IP address of entry.
MAC
MAC address of entry.
Port
Port number of entry.
Time
The logged time .
Add to Allow List
If you want to allow the IP traffic, please check this box and
apply it.
5.1.9
Warning
Warning function is very important for managing switch. You can manage switch by
SYSLOG, E-MAIL, and Fault Relay. It helps you to monitor the switch status on remote site.
When events occurred, the warning message will send to your appointed server, E-MAIL, or
relay fault to switch panel.
System alarm support two warning mode: 1. SYSLOG. 2. E-MAIL.
You
can monitor
switch through selected system events.
Warning – Fault Relay Alarm
When any selected fault event is happened, the Fault LED in switch panel will light up and
the electric relay will signal at the same time.