Installation
IMC-111 Series
Version 1.1
Industrial Media Converter
Q
uick
I
nstallation
G
uide
ORing Industrial Networking Corp.
Media
C o nv ert e r
Media
C o nv ert e r
Features
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Supports Ethernet to fiber or Ethernet to SFP port
Supports LFP (Link Fault Pass-through) function
Supports full/half duplex operation mode
Supports store and forward transmission
Provided DIP-Switch to setting function
High reliability and rigid IP-30 housing
DIN-Rail and wall-mount enabled
IMC-111 Series
IMC-111 series
IMC-111 series
IMC-111 series
LFP (Link Fault Pass through)
IMC-111 series
IMC-111 series
-
( )
100
'
-
.
,
,
is a cost effective solution for the conversion between 10/100Base-
T X and
Base-FX interface, it allows you to extend communication distance by
optical fiber.
supports MDI/MDIX auto detection, so you don t need to
use crossover wires.
with wide operating temperature range from -40
~ 70
and accepts a wide voltage range from dual 12 ~ 48 VDC power inputs, so it is
suitable for harsh operating environments.
also supports the
feature When
one side of the link fails, the other side continues transmitting packets, and waiting for
a response that never arrives from the disconnected side. Use the DIP-Switch to
enable the LFP function then
will force the link to shutdown as soon
as noticed that the other link has failed giving the application software a chance to
react to the situation. Therefore, the
is reliable media converter and
can satisfy most demand of operating environment.
o
C
Introduction
Din-Rail Install Step
Quick Installation Guide
Q I G
IMC-111 Series
PRINTED ON RECYCLED PAPER
Specifications
ORing Media Converter
Model
IMC-111FB-MM-SC
10/100 Base-T(X) Ports in
RJ45 Auto MDI/MDIX
1
Physical Ports
Fiber Ports Number
Technology
Ethernet standards
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
LED Indicators
Green : Power LED x 2 (ON: power input on-line / (OFF) power input off-line
Power indicator
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Green for fiber port duplex indicator- (ON) Full-Duplex/ (OFF) Half-Duplex
100Base-FX fiber port indicator
Power
Input power
Power consumption(Typ.)
Dual 12~48 VDC power inputs on 4-pin terminal block
2.2 Watts
Overload current protection
Reverse polarity protection
Present
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)
218 g
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
Operating Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory approvals
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-6
IEC60068-2-32
Vibration
EN60950-1
Safety
Free Fall
Warranty
5 years
-40 to 70 C (-40 to 158 F)
o
o
I N D U S T R I A L
Connections of Media converter and LFP
function
IMC-111FB-SS-SC
1
Wall-mounted Install Step
Green for port Link/Act -(ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for 100Mbps/10Mbps indicator- (ON) Working at 100Mbps / (OFF) Working at 10Mbps
Green for port duplex indicator- (ON) Full-Duplex / (OFF) Half-Duplex
10/100Base-T(X) RJ 45 port indicator
ORing Industrial Networking Corp.
Copyright© 2010 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oring-networking.com
E-mail: [email protected]
IMC-111PB
1
1
-
-
100Base-FX
Multi-mode
P
o
rts
Fiber Diameter (µm)
62.5/125
50/125
µm
µm
Fiber Optical Connector
SC
Typical Distance (Km)
2 Km
Wavelength (nm)
1310 nm
Max. Output Optical Power (dbm)
-14 dbm
Min. Output Optical Power (dbm)
-23.5 dbm
Max. Input Optical Power
Saturation
(
)
0 dbm
Min. Input Optical Power
Sensitivity
(
)
-31 dbm
Link Budget (db)
7.5 db
Fiber Ports Number
-
-
100Base-FX
Single-mode
P
o
rts
Fiber Diameter (µm)
Fiber Optical Connector
Typical Distance (Km)
Wavelength (nm)
Max. Output Optical Power (dbm)
Min. Output Optical Power (dbm)
Max. Input Optical Power
Saturation
(
)
Min. Input Optical Power
Sensitivity
(
)
Link Budget (db)
1
9/125 µm
SC
30 Km
1310 nm
-8 dbm
-15 dbm
0 dbm
-34 dbm
19 db
100Base-FX SFP port
-
-
1
Processing
Store-and-Forward
DIP-Switch setting
DIP-Switch 1 for LFP mode selection : (ON)
/ (OFF)
enable
disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 100Mbps
DIP-Switch 3 for Ethernet full/half duplex selection : (ON)
(OFF) Ethernet Full-Duplex
Full/Half-Duplex Auto-negotiate /
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex /
(OFF) Full/Half-Duplex Auto-negotiate
Amber LED - (ON) LFP function fail / (OFF) LFP function disable
LFP statue indicator
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
213 g
1907-2-29-IMC111XB-1
