Orientalmotor aSTEP AZ Series, User Manual, Page: 123 / 180

Maintenance commands
123
5 P
ar
amet
er ID lists
2 Maintenance commands
Maintenance commands are used to execute the alarm reset, clear latch information, batch processing of the non-
volatile memory or the like.
Refer to the
AZ Series OPERATING MANUAL Function Edition for details about parameters. When checking the AZ
Series OPERATING MANUAL Function Edition, use the parameter name instead of the parameter ID.
The maintenance commands include processing in which the memory is operated, such as batch
processing of the non-volatile memory and P-PRESET execution. Be careful not to execute them
unnecessarily in succession.
Parameter ID
Name Setting range Initial value
Dec Hex
192 00C0h Alarm reset
− −
194 00C2h Clear alarm history
197 00C5h P-PRESET execution
198 00C6h Configuration
199 00C7h
Batch data initialization (excluding
communication parameters) *1
200 00C8h Read batch NV memory
201 00C9h Write batch NV memory
202 00CAh
All data batch initialization (including
communication parameters) *2
203 00CBh Read from backup
204 00CCh Write to backup
205 00CDh Clear latch information
206 00CEh Clear sequence history
207 00CFh Clear tripmeter
208 00D0h Execute ETO-CLR input
209 00D1h ZSG-PRESET
210 00D2h Clear ZSG-PRESET
211 00D3h Clear information
212 00D4h Clear information history
213 00D5h Alarm history details 1 to 10: Alarm history 1 to 10 0: Not selected
*1 Excluding communication settings of PROFINET.
*2 Including communication settings of PROFINET.