TABLE OF CONTENTS
Additional resources............................................
About this guide...................................................
Product overview .................................................
Getting started .....................................................
Set up ...............................................................
Change Channel .............................................
Low battery warning .......................................
Reset system .......................................................
Safety and care....................................................
Warnings...............................................................
Troubleshooting ...................................................
Specifications.......................................................
ADDITIONAL RESOURCES
Visit out website (
www.oregonscientific.com
)
to learn more about your new product and
other Oregon Scientific products such as
digital cameras, hand-held organizers, health
and fitness gear, and weather stations. The
website also includes contact information for
our customer service department, in case you
need to reach us.
ABOUT THIS GUIDE
Congratulations on your selection of the
THGR328N
Oregon Scientific Wireless
Outdoor Temperature
and
Humidity sensor.
This can be used with new Oregon Scientific
receiver units:
•
BAR998HG
•
BAR321HG
•
AWS888
•
Keep this manual handy as you use your new
product. It contains practical step-by-step
instructions, as well as technical specifications
and warnings you should know.
PRODUCT OVERVIEW
FRONT VIEW
1.
LCD display
2.
LED status indicator
3.
Ventilation duct
LCD
1.
Channel no.
2.
Low battery indicator
3.
Temperature (°C or °F)
4.
Relative humidity
5.
Temperature / Humidity reading
BACK VIEW
1.
Wall mount (recess hole)
2.
Channel switch
3.
Reset
4.
°
C/
°
F
°
switch
5.
Battery compartment
6.
Fold-out stand
TABLE STAND
GETTING STARTED
This product can receive and transmit outdoor
temperature and humidity then relay it back to
the main (indoor) unit.
It can be used with up to 4 other remote
thermo-hygro units to transmit data to the
main unit. The measurement unit (
°
C or
°
F)
and channel number (1,2,3,4 or 5) switches
are located in the battery compartment, and
should be set prior to installation.
Formatted:
Bullets and
Numbering
Formatted:
Bullets and
Numbering
Deleted:
Deleted:
¶
Reception
Deleted:
Time
Deleted:
RTGR328N,
Deleted:
,
Deleted:
, and RF clock
Deleted:
Deleted:
¶
The
RTGR328N
works
as an RF clock receiver for the
models listed above or newer,
Deleted:
Search button¶
EU/UK radio signal format
switch
Deleted:
radio controlled clock
signals,
... [1]